Medal Hanger

After finishing the bed side stands, I finished a piece to hang running medals. The shelf is walnut and the medal hanging wood is wormed maple. The finish is shellac that is waxed clear.

Bed Stands

This project is finally done.  I think I was very slow on this one.  I built two bed side stands.  The wood is cherry and the trim is ebony.  The finish is a Bartley Varnish.  There is no stain on the wood.  The style is Greene and Greene.  Here are the pictures.  I hope to deliver them soon.... week after next.

Two Bedside Stands

One Bedside Stand

The door handles -- cherry and ebony middle

Top -- no drawer

The pillow ebony plug on the breadboard top

Hinges

Side Profile

Open Door

On to finishing the panels

Now the panels needs finishing, then glue the piece, and lastly build and finish the top.  Need to decide stain and finish.

While things go slow

Jigs

Still working on a project for a friend, I am moving way to slow on the project and need to get a cracking.  Today I roughed in the panels to be sure they fit.  All the cherry is fairly red, with little sap wood, I was careful picking it out.  Here are all the parts and jigs I built for the project.  I am sure glad I do not give out deadline dates, all would be disappointed!

Parts

Mentoring at church

I mentored a young man at church.  We went to distribute water at Flint and made this cross.  He designed it, sanded and finished it.  I cut out the boards.  It turned out fairly nice. 

Bed stand plans

Here are the plans for the bed stand.  It was a revised plan from a woodworking magazine.  It will be a Greene and Greene inspired piece.

Bed Tables

I am building bed stands for a friend of mine.  I am just starting and have roughed out the 1 - 1 3/8 inch pieces on my table saw.  I just started today.  I built the jigs for the legs and rails earlier in the week. 

For my Granddaughter

I made a unit for my Granddaughter.  It is cherry, The middle section can be pulled out to get into the closet behind the unit.  My son's house in a cape code, so the rooms have an angled ceiling.  The bottom of the unit is about 26 inches deep, so there are turntables to get the back.  The other side has a desk unit, that changes in height, along with bungee cords to put her stuffed animals and such... so they do not fall our.  The drawers in the middle unit are plywood, dovetails.  All experts tell you that you cannot dovetail plywood... but i wanted to prove them wrong... and you can with enough backer boards to eliminate chips... not for the beginner woodworker.  LED lights are recessed into the shelves and the bottom units.  You can see the rafters in the top shelf.  Also I turned cherry spindles and put a railing across the top.  There are sliding doors on the right side of the unit.

Owl knobs

Spindle rail

Control panel for lights

Lighted unit

Sliding Doors

Turntables

Top Shelf with rafters, close fit!

Recycle Containers

I built my son a recycle container.  There house is small, so to make the most of every room items need to be fitted into spaces.  I made this two container recycle center to meet that need.  It fit, not as well as I would like, but it is usable.  We will see if he uses it.  It is maple, painted.  The panels are also ambrosia maple.

Turning Bowls

I was taught how to turn a bowl.  The wood was green.  I wanted to know if I enjoyed doing it, so I went to a two day class.  I did manage to turn two bowls, one is cracked around the edges, due to the wood drying faster than I could turn the wood.  We will see if turn another bowl, I may.  To get the equipment and tools I need to spend another $300, and am not sure I will turn enough to warrant that money.  I do have a lathe and did clean up these bowls on that lathe.  I had trouble in the class because the distance of the tools on the bowl did not match my focal length.  The teacher at one point, when I asked him again to get my tools started at the right angle, asked if I needed a time out... I told him no, I just need to get started with the tool and then  I can feel my way through the rest... he took the time out and left the room.  The other student came over and we got the tool at the right angle and all went well!  Oh well, I have never been a good student.

Wacky Door Collection

Maple panels -- worm holes or ambrosia

This is part of my wacky door collection, I have been wanting to do something a little more unusual, so since these are in our den, it gave me the opportunity to do that.  The main wood is walnut and the door panels are ambrosia maple, worm holed.  The doors have a 93 degree angle to make them look uneven.  The finish is just shellac and wax.  The wood is natural, which is the way I like my woods.  The wood is from Indiana, where I get most of my wood.   I started with a set of pulls on the doors that I made and went more traditional.  I angled the panels at 93 degrees also, you can see that in one panel, the other it is hard to see.  The legs have a taper and are solid walnut about  1 3/4 inch square.  All panels are matched, as you can see both with the maple and the burl walnut. 

Walnut Burl

Bedside Table

Here is a bedside table I just finished building. It is made of cherry. The finish is a brown dye, covered by de-waxed shellac and then I wiped a polyurethane finish over the shellac. The owner wanted it dark. The drawers are through dovetails and the legs are tapered. The sides are bookend matched.